ATTO Technology 2390D Průvodce nastavením stáhnout pdf (Strana 34)

100

101

/etc/sysconfig/network-scripts/ifcfg-ethn

Edit /etc/sysconfig/network-scripts/ifcfg-ethn, where n specifies the ethernet port number, usually 0 for the

first on-board port. If your workstation has an add-on ethernet card installed, the Linux operating system

may assign ports eth0 through eth3 to the add-on card. In such a case, the on-board Ethernet ports become

eth4 and eth5.

Optionally set the GATEWAY if not set in /etc/sysconfig/network.

Sample snippet from file:

DEVICE="eth0"

BOOTPROTO="static"

IPADDR="192.168.1.100"

NETMASK="255.255.0.0"

ONBOOT="yes"

GATEWAY=192.168.0.1

You'll need the following from your network administrator:

■ A unique static IP address and host name for your system

■ The network gateway IP address.

■ The subnet mask of your network.

■ DNS server IP address(es).

Configure an InfiniBand card

If the card was not present when you last ran the DKU installation, run it again to setup the drivers for the

card. After changing the configuration, you must reboot for them to take effect.

If your workstation is equipped witha Mellanox QDR InfiniBand / 10 GigE adapter card, or a QLogic 9000

DDR InfiniBand adapter card, perform the procedures in this section to configure the IP address of the

Infini|Band port.

Mellanox QDR InfiniBand / 10 GigE adapter card

■ Settings are stored in /etc/sysconfig/network-scripts/ifcfg-ib0

■ You can update the file by running, as root, the script /usr/discreet/DKU/InfiniBand/ofed/install.pl

■ You may need to edit the IP address, netmask, broadcast address and base network address.

QLogic DDR InfiniBand card

■ Settings are stored in /etc/sysconfig/network-scripts/ifcfg-ib1

■ You can update the file by running, as root, the script /sbin/iba_config

■ You may need to edit the IP address.

Install the DKU and the AJA OEM-2K firmware

Check the DKU version

In a terminal, as root, check the currently installed DKU version with the command head -n1

/etc/DKUversion. If the version does not meet the requirements for the new application version, install the

DKU.

Configure an InfiniBand card | 29

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 100 101

Komentáře k této Příručce

Žádné komentáře

Modèles	Type de document
BS7314021M	Manuel de l'utilisateur AEG BS7314021M Manual del usuario, 4 pages
KR8403021M	Manuel de l'utilisateur AEG KR8403021M Manual del usuario, 12 pages
HK623020XB	Manuel de l'utilisateur AEG HK623020XB Benutzerhandbuch, 64 pages
BP8615001M	Manuel de l'utilisateur AEG BP8615001M Manual del usuario, 72 pages
BP8314001M	Manuel de l'utilisateur AEG BP8314001M Manual del usuario, 4 pages
HK693320FG	Manuel de l'utilisateur AEG HK693320FG Manual del usuario, 84 pages
KE8404021M	Manuel de l'utilisateur AEG KE8404021M Manual del usuario, 32 pages
X69453MD02	Manuel de l'utilisateur AEG X69453MD02 User Manual, 60 pages
HK633220XB	Manuel de l'utilisateur AEG HK633220XB Manual del usuario, 32 pages
KS8100001M	Manuel de l'utilisateur AEG KS8100001M Manual del usuario, 4 pages
HG694340NB	Manuel de l'utilisateur AEG HG694340NB Manual del usuario, 36 pages
KM8403001M	Manuel de l'utilisateur AEG KM8403001M Manual del usuario, 4 pages
HK673532FB	Manuel de l'utilisateur AEG HK673532FB Manual del usuario, 40 pages
BP5014321M	Manuel de l'utilisateur AEG BP5014321M Manual del usuario, 12 pages
KM8100001M	Manuel de l'utilisateur AEG KM8100001M Manual del usuario, 4 pages
HK856600FB	Manuel de l'utilisateur AEG HK856600FB Manual del usuario, 48 pages
HK633220FB	Manuel de l'utilisateur AEG HK633220FB Manual del usuario, 36 pages
BP3013001M	Manuel de l'utilisateur AEG BP3013001M Manual del usuario, 36 pages
BP5014301M	Manuel de l'utilisateur AEG BP5014301M Manual del usuario, 84 pages
BE6915001M	Manuel de l'utilisateur AEG BE6915001M Manual del usuario, 76 pages

ATTO Technology 2390D Průvodce nastavením Strana 34

Komentáře k této Příručce

AEG BP3013021M manuels

Aeg BP3013021M Manuel de l'utilisateur (36 pages)

Table des matières

Plus de produits et de manuels pour Cuisine AEG