ATTO Technology FC-3321 Průvodce nastavením stáhnout pdf

Important Information

Avid

recommends that you read all the information in these installation

notes thoroughly before installing or using any new hardware or software

release.

These installation notes describe how to upgrade the single-channel Fibre

Channel adapter board (ATTO

™

ExpressPCI-FC 3300) or the dual-channel

Fibre Channel adapter board (ATTO ExpressPCI-FC 3320) in a LANserver

EX system to the newer dual-channel Fibre Channel adapter board (ATTO

ExpressPCI-FC 3321). You must also update the Fibre Channel adapter

board drivers to make them compatible with the new dual-channel Fibre

Channel adapter board. Do one of the following

t If you are installing the ATTO ExpressPCI-FC 3321 adapter board in

an existing LANserver EX system, use the necessary procedures in

these installation notes.

t If you are installing the ATTO ExpressPCI-FC 3321 adapter board in a

new LANserver EX system, use the procedures in the Avid Unity

LANserver EX Setup Guide.

You cannot mix the ATTO ExpressPCI-FC 3300 or 3320 adapter

board and the ATTO ExpressPCI-FC 3321 adapter board in a

LANserver EX system. If you have one or more ATTO ExpressPCI-FC

3300 or 3320 adapter boards already installed in your LANserver EX

system, you must change all the ATTO ExpressPCI-FC 3300 and 3320

adapter boards to ATTO ExpressPCI-FC 3321 adapter boards for the

LANserver EX system to function properly.

Avid Unity

™

LANserver EX

Fibre Channel Adapter Board Installation Notes

0575101A_IN.fm Page 1 Thursday, March 13, 2003 4:13 PM

1 2 3 4 5 6 ... 13 14

Shrnutí obsahu

Strany 1 - LANserver EX

aImportant InformationAvid® recommends that you read all the information in these installation notes thoroughly before installing or using any new har

Strany 2 - Contents

Fibre Channel Adapter Board Installation Notes10 Updating the ATTO Phantom DevicesThe following procedure describes how to update the ATTO Phantom De

Strany 3 - 3300 3320 3321

Connecting the Fibre Channel Cables1117. Select the ATTO Phantom Device in the Select a Device Driver screen.nIf you do not see the ATTO Phantom Devic

Strany 4 - Adapter Board Drivers

Fibre Channel Adapter Board Installation Notes12 3. Remove the protective covers from the optical cable connector on the optical cable. 4. Remove the

Strany 5 - Adapter Boards

If You Need Help13If You Need HelpIf you are having trouble using your LANserver EX system:1. Retry the action, carefully following the instructions g

Strany 6 - Fibre Channel

make manage move | media™ Avid®Fibre Channel Adapter Board Installation Notes14pricing. However, if you need help locating an Avid office or Avid Res

Strany 7

Fibre Channel Adapter Board Installation Notes2 ContentsSymbols and Conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Strany 8

Identifying Fibre Channel Adapter Boards3Identifying Fibre Channel Adapter BoardsAvid uses several ATTO Fibre Channel adapter boards. The ATTO Express

Strany 9

Fibre Channel Adapter Board Installation Notes4 Uninstalling the ATTO ExpressPCI-FC 3300 or 3320 Adapter Board DriversIf your LANserver EX system has

Strany 10

Removing the ATTO ExpressPCI-FC 3300 or 3320 513. Right-click the ATTO ExpressPCI-FC 3300 or 3320 Fibre Channel Adapter, and select Uninstall. The Con

Strany 11

Fibre Channel Adapter Board Installation Notes6 9. Select the slot where you want to remove an ATTO ExpressPCI-FC 3300 or 3320 adapter board (see Figu

Strany 12 - Running the Profiler

Installing an ATTO ExpressPCI-FC 3321 Adapter 7To install an ATTO ExpressPCI-FC 3321 adapter board:1. Locate an ATTO ExpressPCI-FC 3321 adapter board.

Strany 13 - Technical Support Information

Fibre Channel Adapter Board Installation Notes8 ATTO ExpressPCI-FC 3321 DriversThe ATTO ExpressPCI-FC 3321 adapter board drivers consist of the ATTO P

Strany 14 - Copyright and Disclaimer

ATTO ExpressPCI-FC 3321 Drivers914. Click Yes. Repeat steps 11 through 13 for each channel that you added to the LANserver EX system (two channels per